Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+31
Overload time out
Cause: Overload error. The inverter is overload 110% and time is up.
Reduce the connected load by switching off some equipment.
Source: Voltronic manual, p.47
Also applies to:Axpert VM II 1.2KVAAxpert VM II 2.5KVAAxpert VM II Plus 3KAxpert VM II 3KVA PF1+2
Overload time out — Fault code 07 shown on the display with the fault icon on: Overload time out.
Cause: Overload error. The inverter is overload 105% and time is up.
Reduce the connected load by switching off some equipment.
Source: Voltronic manual, p.29
Also applies to:InfiniSolar V II 2KWInfiniSolar V II 3KWInfiniSolar V II 5KWInfiniSolar V II 1.5KW+8
Over load time out — Fault code 07 shown on the display with the fault icon on: Over load time out.
Cause: Overload error. The inverter is overload 110% and time is up.
Reduce the connected load by switching off some equipment.
Source: Voltronic manual, p.26
Relay fault — Fault code 07 shown on the display with the fault icon on: Relay fault.
Cause: Relay fault.
Source: Voltronic manual, p.52
Also applies to:InfiniSolar 15KWInfiniSolar Super 4KWInfiniSolar Plus 5KW
Relay fault — Fault code 07 shown on the display with the fault icon on: Relay fault.
Cause: Internal components failed.
Please contact your installer.
Source: Voltronic manual, p.50
An relay failure event is detected — Fault code 07 shown on the display with the fault icon on: An relay failure event is detected.
Cause: An relay failure event is detected.
Source: Voltronic manual, p.43
Also applies to:InfiniSolar 2KWInfiniSolar 3KW
An relay failure event is detected — Fault code 07 shown on the display with the fault icon on: An relay failure event is detected.
Cause: An relay failure event is detected.
Source: Voltronic manual, p.46
S SCR Close Fault — Fault code 07 shown on the display with the fault icon on: S SCR Close Fault.
Cause: Internal components failed.
Please contact your installer.
Source: Voltronic manual, p.50
Temperature is too high — Fault code 07 shown on the display with the fault icon on: Temperature is too high..
Cause: Temperature is too high.
Source: Voltronic manual, p.20
Relay failure is detected — Fault code 07 shown on the display with the fault icon on: Relay failure is detected..
Cause: Relay failure is detected.
Source: Voltronic manual, p.68
Overload time out — Fault code 07 shown on the display; the UPS has detected a fault condition: Overload time out.
Cause: Overload error. The UPS is overload 110% and time is up.
Reduce the connected load by switching off some equipment.
Source: Voltronic manual, p.22
Also applies to:Giant Elite 3P/3P 10K-40KVA
INV in L1 is short circuited — Fault code 07 shown on the display; the UPS has detected a fault condition: INV in L1 is short circuited.
Cause: INV in L1 is short circuited.
Source: Voltronic manual, p.41
Price incl. VATAED 917
Price incl. VATAED 1,482
Price incl. VATAED 1,585
Price incl. VATAED 1,438
Price incl. VATAED 1,395
Price incl. VATAED 844
It depends on the model — 39 devices use code 07. On the Axpert MAX II TWIN it means: Overload time out. The card for each model on this page gives its exact meaning and fix.
07 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Reduce the connected load by switching off some equipment. The exact steps for each affected model are listed on this page.
07 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.
All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert KING II TWIN codes All Axpert KING codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert MKS III TWIN codes All Axpert MKS II codes All Axpert VM III codes All Axpert VM IV TWIN (VM4 TWIN) codes All Axpert KS codes All Axpert WP TWIN codes All Axpert 3KP/5KP 24V codes All InfiniSolar V II 6KW (Split Phase) codes All ESS-A510 codes
07 is in the "Fault" class on the Axpert VM II: 16 of the 24 codes documented for it.
All Axpert VM II codes All Axpert VM II (PF1) codes All Axpert V (PF1) codes
07 is in the "Fault" class on the InfiniSolar V II: 29 of the 37 codes documented for it.
All InfiniSolar V II codes All InfiniSolar V II 1.5KW codes All InfiniSolar V II WP codes All InfiniSolar V codes
07 is in the "Fault" class on the InfiniSolar WP LV 12KW Premium: 16 of the 35 codes documented for it.
07 is in the "Fault" class on the InfiniSolar 10KW: 23 of the 40 codes documented for it.
All InfiniSolar 10KW codes All InfiniSolar 15KW codes All InfiniSolar Super 4KW codes All InfiniSolar Plus 5KW codes
07 is in the "Fault" class on the InfiniSolar E 5.5KW: 29 of the 34 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.