Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+28
Output short circuited
Cause: Output short circuited.
Check if wiring is connected well and remove abnormal load.
Source: Voltronic manual, p.47
Also applies to:Axpert KING II TWIN 6KWAxpert KING II TWIN 6.2KWAxpert KING 3KWAxpert KING 5KW+16
Output short circuited or over temperature is detected by internal converter components
Cause: Output short circuited.
Check if wiring is connected well and remove abnormal load.
Source: Voltronic manual, p.36
Also applies to:Axpert MKS III TWIN 6KW
Output short circuited or over temperature is detected by internal converter components — Fault code 05 shown on the display with the fault icon on: Output short circuited or over temperature is detected by internal converter components..
Cause: Output is short circuited.
Check if wiring is connected well and remove abnormal load.
Source: Voltronic manual, p.35
Also applies to:InfiniSolar V II 2P 6KW
Output is short circuited — Fault code 05 shown on the display with the fault icon on: Output is short circuited..
Cause: Output short circuited.
Check if wiring is connected well and remove abnormal load.
Source: Voltronic manual, p.30
INV over current — Fault code 05 shown on the display with the fault icon on: INV over current.
Cause: INV over current.
Source: Voltronic manual, p.52
Also applies to:InfiniSolar 15KWInfiniSolar Super 4KWInfiniSolar Plus 5KW
INV over current — Fault code 05 shown on the display with the fault icon on: INV over current.
Cause: Surge.
Source: Voltronic manual, p.50
An Inverter overcurrent event is detected — Fault code 05 shown on the display with the fault icon on: An Inverter overcurrent event is detected.
Cause: An Inverter overcurrent event is detected.
Source: Voltronic manual, p.43
Also applies to:InfiniSolar 2KWInfiniSolar 3KW
An Inverter overcurrent event is detected — Fault code 05 shown on the display with the fault icon on: An Inverter overcurrent event is detected.
Cause: An Inverter overcurrent event is detected.
Source: Voltronic manual, p.46
INV Curr over — Fault code 05 shown on the display with the fault icon on: INV Curr over.
Cause: Surge.
Source: Voltronic manual, p.50
Average battery current is abnormal — Fault code 05 shown on the display with the fault icon on: Average battery current is abnormal..
Cause: Average battery current is abnormal.
Source: Voltronic manual, p.20
An inverter overcurrent event is detected — Fault code 05 shown on the display with the fault icon on: An inverter overcurrent event is detected..
Cause: An inverter overcurrent event is detected.
Source: Voltronic manual, p.68
Also applies to:Giant Elite 3P/3P 10K-40KVA
BUS voltage is too high — Fault code 05 shown on the display; the UPS has detected a fault condition: BUS voltage is too high.
Cause: BUS voltage is too high.
Source: Voltronic manual, p.41
Price incl. VATAED 917
Price incl. VATAED 1,482
Price incl. VATAED 1,585
Price incl. VATAED 1,703
Price incl. VATAED 662
Price incl. VATAED 723
It depends on the model — 39 devices use code 05. On the Axpert MAX II TWIN it means: Output short circuited. The card for each model on this page gives its exact meaning and fix.
05 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Check if wiring is connected well and remove abnormal load. The exact steps for each affected model are listed on this page.
05 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.
All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert VM IV TWIN (VM4 TWIN) codes All Axpert WP TWIN codes All InfiniSolar V II codes All InfiniSolar V II 1.5KW codes All InfiniSolar V II WP codes All InfiniSolar V codes All ESS-A510 codes
05 is in the "Fault" class on the Axpert KING II TWIN: 26 of the 33 codes documented for it.
All Axpert KING II TWIN codes All Axpert KING codes All Axpert MKS II codes All Axpert VM II codes All Axpert VM II (PF1) codes All Axpert VM III codes All Axpert KS codes All Axpert V (PF1) codes All Axpert 3KP/5KP 24V codes All Galleon One 5KL 48V codes
05 is in the "Fault" class on the Axpert MKS III TWIN: 28 of the 37 codes documented for it.
05 is in the "Fault" class on the InfiniSolar V II 6KW (Split Phase): 28 of the 36 codes documented for it.
05 is in the "Fault" class on the InfiniSolar WP LV 12KW Premium: 16 of the 35 codes documented for it.
05 is in the "Fault" class on the InfiniSolar 10KW: 23 of the 40 codes documented for it.
All InfiniSolar 10KW codes All InfiniSolar 15KW codes All InfiniSolar Super 4KW codes All InfiniSolar Plus 5KW codes
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.