Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+30
Output voltage is too high
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.47
Also applies to:Axpert MKS II 5KVAAxpert KS 1KVAAxpert KS 3KVAAxpert KS 5KVA+2
Output voltage is abnormal. (For 1K/2K/3K model) Output voltage is too high. (For 4K/5K model) — Fault code 06 shown on the display with the fault icon on: Output voltage is abnormal. (For 1K/2K/3K model) Output voltage is too high. (For 4K/5K model).
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.27
Also applies to:Axpert V 1KVA-5KVA PF1
Output voltage is abnormal. (For 3KVA model) Output voltage is too high. (For 3KVA Plus/5KVA model) — Fault code 06 shown on the display with the fault icon on: Output voltage is abnormal. (For 3KVA model) Output voltage is too high. (For 3KVA Plus/5KVA model).
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.33
Also applies to:InfiniSolar V II 2KWInfiniSolar V II 3KWInfiniSolar V II 5KWInfiniSolar V II 1.5KW+8
Output voltage abnormal — Fault code 06 shown on the display with the fault icon on: Output voltage abnormal.
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.26
Also applies to:InfiniSolar V II 2P 6KW
Output voltage is abnormal — Fault code 06 shown on the display with the fault icon on: Output voltage is abnormal..
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.30
Over temperature — Fault code 06 shown on the display with the fault icon on: Over temperature.
Cause: Over temperature.
Source: Voltronic manual, p.52
Also applies to:InfiniSolar 15KWInfiniSolar Super 4KWInfiniSolar Plus 5KW
Over temperature — Fault code 06 shown on the display with the fault icon on: Over temperature.
Cause: Internal temperature is too high.
Source: Voltronic manual, p.50
Over temperature fault — Fault code 06 shown on the display with the fault icon on: Over temperature fault.
Cause: Over temperature fault.
Source: Voltronic manual, p.43
Also applies to:InfiniSolar 2KWInfiniSolar 3KW
Over temperature fault — Fault code 06 shown on the display with the fault icon on: Over temperature fault.
Cause: Over temperature fault.
Source: Voltronic manual, p.46
R SCR Close Fault — Fault code 06 shown on the display with the fault icon on: R SCR Close Fault.
Cause: Internal components failed.
Please contact your installer.
Source: Voltronic manual, p.50
Average output current is abnormal — Fault code 06 shown on the display with the fault icon on: Average output current is abnormal..
Cause: Average output current is abnormal.
Source: Voltronic manual, p.20
Over temperature fault — Fault code 06 shown on the display with the fault icon on: Over temperature fault..
Cause: The internal temperature is higher than specified temperature.
Source: Voltronic manual, p.68
Also applies to:Giant Elite 3P/3P 10K-40KVA
BUS voltage is too low — Fault code 06 shown on the display; the UPS has detected a fault condition: BUS voltage is too low.
Cause: BUS voltage is too low.
Source: Voltronic manual, p.41
Price incl. VATAED 917
Price incl. VATAED 1,482
Price incl. VATAED 1,585
Price incl. VATAED 1,438
Price incl. VATAED 1,395
Price incl. VATAED 844
It depends on the model — 39 devices use code 06. On the Axpert MAX II TWIN it means: Output voltage is too high. The card for each model on this page gives its exact meaning and fix.
06 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
1. Reduce the connected load. The exact steps for each affected model are listed on this page.
06 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.
All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert KING II TWIN codes All Axpert KING codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert MKS III TWIN codes All Axpert VM II codes All Axpert VM II (PF1) codes All Axpert VM III codes All Axpert VM IV TWIN (VM4 TWIN) codes All Axpert WP TWIN codes All ESS-A510 codes All Galleon One 5KL 48V codes
06 is in the "Fault" class on the Axpert MKS II: 19 of the 25 codes documented for it.
All Axpert MKS II codes All Axpert KS codes All Axpert 3KP/5KP 24V codes
06 is in the "Fault" class on the Axpert V (PF1): 16 of the 21 codes documented for it.
06 is in the "Fault" class on the InfiniSolar V II: 29 of the 37 codes documented for it.
All InfiniSolar V II codes All InfiniSolar V II 1.5KW codes All InfiniSolar V II WP codes All InfiniSolar V codes
06 is in the "Fault" class on the InfiniSolar V II 6KW (Split Phase): 28 of the 36 codes documented for it.
06 is in the "Fault" class on the InfiniSolar WP LV 12KW Premium: 16 of the 35 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.