Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+49
Output voltage is too low
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.47
Also applies to:Axpert MKS III TWIN 6KW
Current sensor failed — Fault code 58 shown on the display with the fault icon on: Current sensor failed.
Cause: Output abnormal (Inverter voltage below than 190Vac or is higher than 260Vac).
Source: Voltronic manual, p.35
S OP Volt CT — Fault code 58 shown on the display with the fault icon on: S OP Volt CT.
Cause: Internal components failed.
Please contact your installer.
Source: Voltronic manual, p.51
Price incl. VATAED 917
Price incl. VATAED 1,482
Price incl. VATAED 1,585
Price incl. VATAED 1,438
Price incl. VATAED 1,395
Price incl. VATAED 844
It depends on the model — 29 devices use code 58. On the Axpert MAX II TWIN it means: Output voltage is too low. The card for each model on this page gives its exact meaning and fix.
58 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
1. Reduce the connected load. The exact steps for each affected model are listed on this page.
58 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.
All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert KING II TWIN codes All Axpert KING codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert MKS II codes All Axpert VM II codes All Axpert VM II (PF1) codes All Axpert VM III codes All Axpert VM IV TWIN (VM4 TWIN) codes All Axpert KS codes All Axpert V (PF1) codes All Axpert WP TWIN codes All Axpert 3KP/5KP 24V codes All InfiniSolar V II codes All InfiniSolar V II 1.5KW codes All InfiniSolar V II 6KW (Split Phase) codes All InfiniSolar V II WP codes All InfiniSolar V codes All ESS-A510 codes All Galleon One 5KL 48V codes
58 is in the "Fault" class on the Axpert MKS III TWIN: 28 of the 37 codes documented for it.
58 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.