Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert KING 3KWAxpert KING 5KW
PV voltage is over limitation — Fault code 59 shown on the display with the fault icon on: PV voltage is over limitation.
Cause: PV voltage is over limitation.
Source: Voltronic manual, p.31
Also applies to:Axpert VM II 1.2KVAAxpert VM II 2.5KVAAxpert VM II Plus 3KAxpert VM II 3KVA PF1+4
PV voltage is over limitation — Fault code 59 shown on the display with the fault icon on: PV voltage is over limitation.
Cause: PV input voltage is beyond the specification.
Reduce the number of PV modules in series.
Source: Voltronic manual, p.29
Also applies to:Axpert VM IV-4000 TWIN-PV 5600Axpert VM IV-6000 TWIN-PV 8000
PV voltage is beyond the acceptable range — Fault code 59 shown on the display with the fault icon on: PV voltage is beyond the acceptable range.
Cause: PV voltage is beyond the acceptable range.
Reduce the number of PV modules in series.
Source: Voltronic manual, p.45
T OP Volt CT — Fault code 59 shown on the display with the fault icon on: T OP Volt CT.
Cause: Internal components failed.
Please contact your installer.
Source: Voltronic manual, p.51
Price incl. VATAED 844
Price incl. VATAED 1,180
Price incl. VATAED 662
Price incl. VATAED 844
Price incl. VATAED 5,847
It depends on the model — 6 devices use code 59. On the Axpert KING it means: PV voltage is over limitation. The card for each model on this page gives its exact meaning and fix.
59 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Restart the unit. If the fault happens again, contact your installer or the repair centre. The exact steps for each affected model are listed on this page.
59 is in the "Fault" class on the Axpert KING: 18 of the 25 codes documented for it.
59 is in the "Fault" class on the Axpert VM II: 16 of the 24 codes documented for it.
All Axpert VM II codes All Axpert VM II (PF1) codes All Axpert VM III codes
59 is in the "Fault" class on the Axpert VM IV TWIN (VM4 TWIN): 17 of the 26 codes documented for it.
59 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.