Voltronic Galleon III 1K-3K Error Codes: Causes & Fixes (13 codes)

This is the complete fault table for the Voltronic Galleon III 1K-3K ups family — 13 codes shared by 3 model numbers, transcribed from the official manual. On this Voltronic device, a fault code means the unit has entered protection and stopped normal operation; a warning leaves it running. The exact indication (LED pattern or display code) is listed per code below.

Also coversGalleon III 1KGalleon III 2KGalleon III 3K

Last checked against the official manuals on July 27, 2026.

Fault(13)— operation stops until cleared

Fault codes (13)operation stops until cleared

Bus start fail.

Fault

Fault code 01 shown on the display; the UPS has detected a fault condition: Bus start fail.

CauseBus start fail.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Bus over.

Fault

Fault code 02 shown on the display; the UPS has detected a fault condition: Bus over.

CauseBus over.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Bus under.

Fault

Fault code 03 shown on the display; the UPS has detected a fault condition: Bus under.

CauseBus under.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Bus unbalance.

Fault

Fault code 04 shown on the display; the UPS has detected a fault condition: Bus unbalance.

CauseBus unbalance.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Inverter soft start failure.

Fault

Fault code 11 shown on the display; the UPS has detected a fault condition: Inverter soft start failure.

CauseInverter soft start failure.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Inverter voltage high.

Fault

Fault code 12 shown on the display; the UPS has detected a fault condition: Inverter voltage high.

CauseInverter voltage high.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Inverter voltage Low.

Fault

Fault code 13 shown on the display; the UPS has detected a fault condition: Inverter voltage Low.

CauseInverter voltage Low.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Inverter output short.

Fault

Fault code 14 shown on the display; the UPS has detected a fault condition: Inverter output short.

CauseInverter output short.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Battery voltage too high.

Fault

Fault code 27 shown on the display; the UPS has detected a fault condition: Battery voltage too high.

CauseBattery voltage too high.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Battery voltage too low.

Fault

Fault code 28 shown on the display; the UPS has detected a fault condition: Battery voltage too low.

CauseBattery voltage too low.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Over temperature.

Fault

Fault code 41 shown on the display; the UPS has detected a fault condition: Over temperature.

CauseOver temperature.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Overload.

Fault

Fault code 43 shown on the display; the UPS has detected a fault condition: Overload.

CauseOverload.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Charger failure.

Fault

Fault code 45 shown on the display; the UPS has detected a fault condition: Charger failure.

CauseCharger failure.

Recommended fixRestart the unit. If the fault happens again, contact your installer or the repair centre.

Source:Galleon-III-Tower-Rack-1-3K-manual.pdf· page 31

Still seeing a code on your Galleon III 1K-3K?

Send us the code on your screen and a Voltronic technician will reply with the exact steps for your unit. Support is free for life — a first diagnosis never needs a callout.

Message a technician on WhatsApp Call +971542899793 or use the contact form

Keep troubleshooting

Related devices

Common questions about Galleon III 1K-3K error codes

What is the difference between a fault and a warning on the Galleon III 1K-3K?: A fault puts the unit into protection and stops normal operation — this page lists 13 of them for the Galleon III 1K-3K. The Galleon III 1K-3K manual defines no separate warning table — every listed code stops operation. Resolve the cause of a fault before restarting; warnings can usually be cleared while the unit runs.
Which model numbers does this page cover?: The Galleon III 1K-3K shares its firmware and fault table with 2 other model numbers: Galleon III 1K, Galleon III 2K, Galleon III 3K. If your unit is any of these, every code on this page applies to it.
Where do these codes come from?: Every entry was transcribed from Galleon-III-Tower-Rack-1-3K-manual.pdf — Voltronic's official documentation. Each row cites its source manual (and page where printed), so you can verify the wording before acting on it.

Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.