43Fault

Voltronic device error 43

Inv R/S short

Fault — the unit enters fault protection and stops normal operation until the fault is cleared — how it is shown (LED pattern or display code) depends on the model.

The exact meaning depends on your model:

InfiniSolar TX-PA 30KW

InverterFault

What it means

Inv R/S short — Fault code 43 shown on the display with the fault icon on: Inv R/S short.

Cause: Output short circuited.

How to fix it

  1. Check if wiring is connected well and remove abnormal load
  2. If the error message still remains, please contact your installer.

Source: InfiniSolar-TX-PA_manual.pdf, p.51

Galleon II 6K-10K

upsFault

Also applies to:Galleon II 6KGalleon II 10KGalleon III 1KGalleon III 2KGalleon III 3KGiant Elite 1P/1P 6K-10KWinner Pro 1KVA-3KVAWinner Pro 6KVA+4

What it means

Overload — Fault code 43 shown on the display; the UPS has detected a fault condition: Overload.

Cause: Overload.

How to fix it

  1. Restart the unit.
  2. If the fault happens again, contact your installer or the repair centre.

Source: GalleonII-6-10K-Tower-RT-manual.pdf, p.29 · Galleon-III-Tower-Rack-1-3K-manual.pdf, p.31 · Giant-Elite-1P-1P_manual.pdf, p.26 · +3 more official manuals

Galleon X9 6K-10K RT

upsFault

Also applies to:Galleon X9 6K RTGalleon X9 10K RT

What it means

Over load — Fault code 43 shown on the display; the UPS has detected a fault condition: Over load.

Cause: Overload time is out of the specification and the UPS shuts down automatically.

How to fix it

Remove excess loads from UPS output and restart it.

Source: Galleon-X9-6-10K-RT_manual.pdf, p.29

Otima II

upsFault

Also applies to:Otima II 800VA-3KVAOtima II Tower 1K-5K

What it means

Over load — Fault code 43 shown on the display; the UPS has detected a fault condition: Over load.

Cause: Over load.

How to fix it

  1. Restart the unit.
  2. If the fault happens again, contact your installer or the repair centre.

Source: Otima-II-User-Manual.pdf, p.17 · OtimaII-Tower-1K-5K-manual.pdf, p.14

Frequently asked questions

What does error 43 mean on a Voltronic device?
It depends on the model — 10 devices use code 43. On the InfiniSolar TX-PA 30KW it means: Inv R/S short. The card for each model on this page gives its exact meaning and fix.
Is error 43 a fault or a warning?
43 is a fault code: the unit enters protection and stops normal operation until it is cleared.
How do I clear or fix error 43?
1. Check if wiring is connected well and remove abnormal load. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the InfiniSolar TX-PA 30KW

All InfiniSolar TX-PA 30KW codes

Other codes on the Galleon II 6K-10K

All Galleon II 6K-10K codes All Galleon III 1K-3K codes All Giant Elite 1P/1P codes All Winner Pro codes All Winner Pro 6-10KVA codes All Winner Pro+ 1K-3K codes

Other codes on the Galleon X9 6K-10K RT

All Galleon X9 6K-10K RT codes

Other codes on the Otima II

All Otima II codes All Otima II Tower codes

Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.