Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+26
Current sharing fault
Cause: Current sharing fault.
Source: Voltronic manual, p.64
OP Curr Cir Fault — Fault code 72 shown on the display with the fault icon on: OP Curr Cir Fault.
Cause: OP Curr Cir Fault.
Source: Voltronic manual, p.52
Price incl. VATAED 917
Price incl. VATAED 1,482
Price incl. VATAED 1,585
Price incl. VATAED 1,438
Price incl. VATAED 1,395
Price incl. VATAED 1,703
It depends on the model — 18 devices use code 72. On the Axpert MAX II TWIN it means: Current sharing fault. The card for each model on this page gives its exact meaning and fix.
72 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Restart the unit. If the fault happens again, contact your installer or the repair centre. The exact steps for each affected model are listed on this page.
72 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.
All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert KING II TWIN codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert MKS III TWIN codes All Axpert WP TWIN codes All Axpert 3KP/5KP 24V codes All InfiniSolar V II codes All InfiniSolar V II 6KW (Split Phase) codes All InfiniSolar V II WP codes All Galleon One 5KL 48V codes
72 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.