Warning — a protection warning — the unit keeps running, but deal with the cause before it escalates.
Also applies to:Galleon II 6KGalleon II 10K
Locked in bypass after overload 3 times in 30min — Warning code 33 flashing on the display: Locked in bypass after overload 3 times in 30min.
Cause: Locked in bypass after overload 3 times in 30min.
Source: Voltronic manual, p.29
Also applies to:Galleon X9 6K RTGalleon X9 10K RT
Overload 3Times — Warning code 33 flashing on the display: Overload 3Times.
Cause: Locked in bypass after overload 3 times in 30 minutes.
Source: Voltronic manual, p.28
Also applies to:Giant Elite 1P/1P 6K-10K
Overload 3 times in 30min — Warning code 33 flashing on the display: Overload 3 times in 30min.
Cause: Overload 3 times in 30min.
Source: Voltronic manual, p.26
It depends on the model — 3 devices use code W33. On the Galleon II 6K-10K it means: Locked in bypass after overload 3 times in 30min. The card for each model on this page gives its exact meaning and fix.
W33 is a warning: the unit keeps running. Fix the underlying condition before it escalates.
The unit keeps operating. Clear the condition shown and the warning resets automatically; if it persists, contact your installer or the repair centre. The exact steps for each affected model are listed on this page.
W33 is in the "Warning" class on the Galleon II 6K-10K: 18 of the 42 codes documented for it.
W33 is in the "Warning" class on the Galleon X9 6K-10K RT: 12 of the 28 codes documented for it.
W33 is in the "Warning" class on the Giant Elite 1P/1P: 9 of the 19 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.