Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:InfiniSolar Super 4KWInfiniSolar Plus 5KW
Wire connection fault — Fault code 35 shown on the display with the fault icon on: Wire connection fault.
Cause: Internal wires loosen.
Please contact your installer.
Source: Voltronic manual, p.51
Also applies to:Galleon X9 6K RTGalleon X9 10K RT
Para Comm Fail — Fault code 35 shown on the display; the UPS has detected a fault condition: Para Comm Fail.
Cause: Parallel cable for communication is not connected well in the parallel system.
Connect the parallel cable well.
Source: Voltronic manual, p.29
Price incl. VATAED 966
Price incl. VATAED 1,180
It depends on the model — 4 devices use code 35. On the InfiniSolar 10KW it means: Wire connection fault. The card for each model on this page gives its exact meaning and fix.
35 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Please contact your installer. The exact steps for each affected model are listed on this page.
35 is in the "Fault" class on the InfiniSolar 10KW: 23 of the 40 codes documented for it.
All InfiniSolar 10KW codes All InfiniSolar Super 4KW codes All InfiniSolar Plus 5KW codes
35 is in the "Fault" class on the Galleon X9 6K-10K RT: 16 of the 28 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.