80Fault

Voltronic inverter error 80

Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.

Axpert MAX II TWIN

InverterFault

Also applies to:Axpert MAX II TWIN 8KWAxpert MAX II TWIN 11KWAxpert MAX II TWIN 12KWAxpert MAX II Duplex 8KW+26

What it means

CAN fault

Cause: CAN fault.

How to fix it

  1. Restart the unit.
  2. If the fault happens again, contact your installer or the repair centre.

Source: Voltronic manual, p.64

Models that show 80

Frequently asked questions

What does error 80 mean on a Voltronic inverter?

It depends on the model — 18 devices use code 80. On the Axpert MAX II TWIN it means: CAN fault. The card for each model on this page gives its exact meaning and fix.

Is error 80 a fault or a warning?

80 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.

How do I clear or fix error 80?

Restart the unit. If the fault happens again, contact your installer or the repair centre. The exact steps for each affected model are listed on this page.

Related error codes

Other codes on the Axpert MAX II TWIN

80 is in the "Fault" class on the Axpert MAX II TWIN: 29 of the 38 codes documented for it.

All Axpert MAX II TWIN codes All Axpert MAX II Duplex codes All Axpert MAX II codes All Axpert MAX TWIN codes All Axpert MAX E TWIN codes All Axpert MAX E Duplex codes All Axpert MAX codes All Axpert KING II TWIN codes All Axpert MKS IV TWIN codes All Axpert MKS IV codes All Axpert MKS III TWIN codes All Axpert WP TWIN codes All Axpert 3KP/5KP 24V codes All InfiniSolar V II codes All InfiniSolar V II 6KW (Split Phase) codes All InfiniSolar V II WP codes All Galleon One 5KL 48V codes

Other codes on the InfiniSolar TX-PA 30KW

80 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.

All InfiniSolar TX-PA 30KW codes

Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.