Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:InfiniSolar Plus 5KW
OP voltage fault — Fault code 36 shown on the display with the fault icon on: OP voltage fault.
Cause: Grid connects to output terminal.
Don't connect the grid to the ouput terminal.
Source: Voltronic manual, p.51
OP voltage fault — Fault code 36 shown on the display with the fault icon on: OP voltage fault.
Cause: Grid connects to output terminal.
Don't connect the grid to the output terminal.
Source: Voltronic manual, p.48
OP Circuit Fault — Fault code 36 shown on the display with the fault icon on: OP Circuit Fault.
Cause: Grid connects to output terminal.
Don't connect the grid to the output terminal.
Source: Voltronic manual, p.51
Also applies to:Galleon II 6KGalleon II 10K
Parallel output current unbalance — Fault code 36 shown on the display; the UPS has detected a fault condition: Parallel output current unbalance.
Cause: Parallel output current unbalance.
Source: Voltronic manual, p.29
Also applies to:Galleon X9 6K RTGalleon X9 10K RT
OP.I Unbalance — Fault code 36 shown on the display; the UPS has detected a fault condition: OP.I Unbalance.
Cause: The output current is extremely unbalanced between the paralleled UPSs or there is an error in the parallel system.
Contact the dealer to repair.
Source: Voltronic manual, p.29
Price incl. VATAED 1,180
Price incl. VATAED 966
Price incl. VATAED 5,847
It depends on the model — 6 devices use code 36. On the InfiniSolar 10KW it means: OP voltage fault. The card for each model on this page gives its exact meaning and fix.
36 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Don't connect the grid to the ouput terminal. The exact steps for each affected model are listed on this page.
36 is in the "Fault" class on the InfiniSolar 10KW: 23 of the 40 codes documented for it.
36 is in the "Fault" class on the InfiniSolar Super 4KW: 23 of the 40 codes documented for it.
36 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.
36 is in the "Fault" class on the Galleon II 6K-10K: 24 of the 42 codes documented for it.
36 is in the "Fault" class on the Galleon X9 6K-10K RT: 16 of the 28 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.