Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:InfiniSolar Super 4KWInfiniSolar Plus 5KW
INV DC voltage over — Fault code 32 shown on the display with the fault icon on: INV DC voltage over.
Cause: Load fluctuates.
Source: Voltronic manual, p.51
DCDC current over — Fault code 32 shown on the display with the fault icon on: DCDC current over.
Cause: Surge.
Source: Voltronic manual, p.52
DCDC curr over — Fault code 32 shown on the display with the fault icon on: DCDC curr over.
Cause: Load fluctuates.
Source: Voltronic manual, p.51
Price incl. VATAED 966
Price incl. VATAED 1,180
Price incl. VATAED 5,847
It depends on the model — 5 devices use code 32. On the InfiniSolar 10KW it means: INV DC voltage over. The card for each model on this page gives its exact meaning and fix.
32 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
1. Restart the inverter. The exact steps for each affected model are listed on this page.
32 is in the "Fault" class on the InfiniSolar 10KW: 23 of the 40 codes documented for it.
All InfiniSolar 10KW codes All InfiniSolar Super 4KW codes All InfiniSolar Plus 5KW codes
32 is in the "Fault" class on the InfiniSolar 15KW: 27 of the 42 codes documented for it.
32 is in the "Fault" class on the InfiniSolar TX-PA 30KW: 55 of the 76 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.