Warning — the red LED flashes and the inverter keeps running. Deal with it before it escalates.
Also applies to:InfiniSolar 10KWInfiniSolar Super 4KWInfiniSolar Plus 5KW
Ground Loss — Warning code 06 flashing on the display: Ground Loss.
Cause: Ground wire is not detected.
Source: Voltronic manual, p.51
LineLTLLoss — Warning code 06 flashing on the display: LineLTLLoss.
Cause: Grid voltage is higher than 253V.
Source: Voltronic manual, p.49
Also applies to:Giant Elite 3P/3P 10K-40KVA
EPO active — Warning code 06 flashing on the display: EPO active.
Cause: EPO active.
Source: Voltronic manual, p.41
Price incl. VATAED 2,339
Price incl. VATAED 2,339
Price incl. VATAED 966
Price incl. VATAED 1,180
Price incl. VATAED 5,847
It depends on the model — 6 devices use code W06. On the InfiniSolar WP LV 12KW Premium it means: Ground Loss. The card for each model on this page gives its exact meaning and fix.
W06 is a warning: the red LED flashes and the unit keeps running. Fix the underlying condition before it escalates.
The unit keeps operating. Clear the condition shown and the warning resets automatically; if it persists, contact your installer or the repair centre. The exact steps for each affected model are listed on this page.
W06 is in the "Warning" class on the InfiniSolar WP LV 12KW Premium: 19 of the 35 codes documented for it.
All InfiniSolar WP LV 12KW Premium codes All InfiniSolar 10KW codes All InfiniSolar Super 4KW codes All InfiniSolar Plus 5KW codes
W06 is in the "Warning" class on the InfiniSolar TX-PA 30KW: 21 of the 76 codes documented for it.
W06 is in the "Warning" class on the Giant Elite 3P/3P: 12 of the 25 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.