Version mismatch between controller board and power board
Fault — the inverter cuts its output and the red LED stays solid until the fault is cleared.
Also applies to:ESS510
Version mismatch between controller board and power board
Cause: Version mismatch between controller board and power board.
Source: Voltronic manual, p.45
Also applies to:InfiniSolar 2KWInfiniSolar 3KW
Version mismatch between controller board and power board — Fault code 30 shown on the display with the fault icon on: Version mismatch between controller board and power board.
Cause: Version mismatch between controller board and power board.
Source: Voltronic manual, p.49
Price incl. VATAED 1,288
Price incl. VATAED 1,288
Price incl. VATAED 2,962
Price incl. VATAED 723
30 means: Version mismatch between controller board and power board. Version mismatch between controller board and power board.
30 is a fault code: the inverter cuts its output and the red LED stays solid until it is cleared.
Shut down the inverter completely. Restart the inverter to see if it's ok. The exact steps for each affected model are listed on this page.
30 is in the "Fault" class on the InfiniSolar E 5.5KW: 29 of the 34 codes documented for it.
30 is in the "Fault" class on the InfiniSolar 2KW/3KW: 29 of the 29 codes documented for it.
Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.