00Fault

Voltronic charge controller error 00 (F0)

Battery wires are not connected well, or battery defect

Also displayed as F0 on some models.

Fault — the charge controller enters fault protection and stops normal operation until the fault is cleared — how it is shown (LED pattern or display code) depends on the model.

SCC-MPPT Solar Charge Controller

Charge controllerFault

Also applies to:SCC-MPPT 300WSCC-MPPT 600WSCC-MPPT 850W

What it means

Battery wires are not connected well, or battery defect — Fault code F0 shown on the display with the fault icon on: Battery wires are not connected well, or battery defect..

Cause: Battery wires are not connected well. Battery defect.

How to fix it

  1. Check if battery wires are properly connected.
  2. Replace battery.

Source: SCC-MPPT_manual.pdf, p.6

Frequently asked questions

What does error 00 mean on a Voltronic charge controller?
00 means: Battery wires are not connected well, or battery defect. Battery wires are not connected well. Battery defect.
Is error 00 a fault or a warning?
00 is a fault code: the charge controller enters protection and stops normal operation until it is cleared.
How do I clear or fix error 00?
Check if battery wires are properly connected. Replace battery.

Related error codes

Other codes on the SCC-MPPT Solar Charge Controller

All SCC-MPPT Solar Charge Controller codes

Compiled from official Voltronic user manuals. Always consult your device manual and a qualified technician before performing repairs.