
Voltronic SCC-PWM-120W Solar Charge Controller
- Connected Battery Type:Sealed lead acid battery
- Ripple Voltage:<± 1 V

The SCC PWM SCC-PWM-360W is a solar charge controller rated SCC-PWM-360W.
In stock
The SCC PWM SCC-PWM-360W is a solar charge controller rated SCC-PWM-360W. Every figure on this page is read from the manufacturer's manual for the SCC PWM series.
Specifications last updated 18 August 2026
| Connected Battery Type | Sealed lead acid battery |
|---|---|
| Ripple Voltage | <± 1 V |
| LED Display | Green LED indicating charging status |
| IP Protection | IP 31 |
| Maximum PV Array Open Circuit Voltage | 25 VDC |
| Maximum PV Array Power | 120 W |
| Maximum Current | 10 A |
| Connector | PV/Battery terminal block |
|---|
| Operating Temperature | -20°C to 55°C |
|---|---|
| Storage Temperature | -40°C to 75°C |
| Altitude | 0 ~ 3000 m |
| Humidity | 0-90 % RH (non-condensing) |








The SCC-PWM-360W takes up to 120 W of PV array. The string has to stay below 25 VDC open-circuit — that ceiling is reached on a cold bright morning, not at noon.
It is published for sealed lead-acid batteries. Charge voltages differ between chemistries, so a bank of another type is not a drop-in swap.
It carries an IP31 rating. That is the only ingress figure published for this unit, so read it against the spot you mean to mount it in rather than assuming shade is enough.