Voltronic Power AXPERT-VM-III-TWIN-IP52-40A-AXPERT-VM-III-TWIN-IP52-4/6.5K
The Axpert VM III TWIN IP52 40A Axpert VM III TWIN IP52 4.5K is an off-grid solar inverter rated Axpert VM III TWIN IP52 4.5K.
Technical Specifications
| Parameter | AXPERT-VM-III-TWIN-IP52-40A-AXPERT-VM-III-TWIN-IP52-4.5K | AXPERT-VM-III-TWIN-IP52-40A-AXPERT-VM-III-TWIN-IP52-6.5K |
|---|---|---|
| Electrical / AC Output Data | ||
| Rated AC Power | 4500VA/4500W | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) | |
| AC Voltage Regulation (Battery Mode) | 230VAC ± 5% | |
| Max Efficiency | 93% | |
| Surge / Peak Power | 9000VA | 13000VA |
| PV String Input Data | ||
| Max PV Array Power | 6000W | |
| Max PV Input Current | 40A | |
| Additional Specifications | ||
| Maximum Solar Charge Current | 120A | |
| Maximum Charge Current | 120A | |
| Transfer Time | 10 ms (For Personal 20 ms (For Home | |
| MPP Range @ Operating Voltage | 60 450 | |
| Floating Charge Voltage | 27 VDC | |
| Waveform | Pure sine wave | |
| Maximum PV Array Open Circuit Voltage | 500 VDC | |
| Solar Charger type | MPPT | |
| Battery Data | ||
| Max AC Charge Current | 100A | |
| Communication | ||
| Communication Interface | USB/RS232/RS485/WiFi/Dry-contact | |
| Protection Features | ||
| IP Rating | IP52 | |
| Operating Conditions | ||
| Relative Humidity | 5% to 95% | |
| Operating Temperature | -10°C to 50°C | |
| Storage Temperature Range | -15°C to 60°C | |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.