Voltronic Power Solutions

Voltronic Power AXPERT-MAX-3.6/7.2KW

The Axpert MAX 3.6KW is a solar charge controller rated 3.6KW. Every figure on this page is read from the manufacturer's manual for the Axpert MAX series.

Models Covered: AXPERT-MAX-3.6KW, AXPERT-MAX-7.2KW

Manufacturer: Voltronic Power

Application: The Axpert MAX 3.6KW is a solar charge controller rated 3.6KW. Every figure on this page is read from the manufacturer's manual for the Axpert MAX series.

Technical Specifications

Technical Specifications
Parameter AXPERT-MAX-3.6KWAXPERT-MAX-7.2KW
Electrical / AC Output Data
DC Offset ≤100mV
Rated Output Power 3600W7200W
Max Efficiency 91%93%
Battery Data
High DC Cut-off Voltage 33Vdc66Vdc
Low DC Cut-off Voltage 22Vdc44Vdc
Additional Specifications
Nominal DC Input Voltage 24Vdc
High DC Recovery Voltage 32Vdc
Max parallel numbers 6
Surge Capacity 2* rated power for 5 seconds
Storage temperature -15°C~ 60°C
Humidity 5% to 95% Relative Humidity (Non-condensing)

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Yemen

Market Yemen
Grid authority / regulator Public Electricity Corporation (PEC), Ministry of Electricity and Energy
Quotation currency YER
Support hours timezone Asia/Aden
Delivery & installation coverage Sana'a, Aden, Taiz, Al Hudaydah, Mukalla

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.