Voltronic Power Solutions

Voltronic Power AXPERT-MAX-3.6/7.2KW

The Axpert MAX 3.6KW is a solar charge controller rated 3.6KW. Every figure on this page is read from the manufacturer's manual for the Axpert MAX series.

Models Covered: AXPERT-MAX-3.6KW, AXPERT-MAX-7.2KW

Manufacturer: Voltronic Power

Application: The Axpert MAX 3.6KW is a solar charge controller rated 3.6KW. Every figure on this page is read from the manufacturer's manual for the Axpert MAX series.

Technical Specifications

Technical Specifications
Parameter AXPERT-MAX-3.6KWAXPERT-MAX-7.2KW
Electrical / AC Output Data
DC Offset ≤100mV
Rated Output Power 3600W7200W
Max Efficiency 91%93%
Battery Data
High DC Cut-off Voltage 33Vdc66Vdc
Low DC Cut-off Voltage 22Vdc44Vdc
Additional Specifications
Nominal DC Input Voltage 24Vdc
High DC Recovery Voltage 32Vdc
Max parallel numbers 6
Surge Capacity 2* rated power for 5 seconds
Storage temperature -15°C~ 60°C
Humidity 5% to 95% Relative Humidity (Non-condensing)

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.