Voltronic Power SCC-PWM-1200W
The SCC PWM SCC-PWM-1200W is a solar charge controller rated SCC-PWM-1200W.
Technical Specifications
| Parameter | SCC-PWM-1200W |
|---|---|
| Battery Data | |
| Supported Battery Type | Sealed lead acid battery |
| Additional Specifications | |
| Ripple Voltage | <± 1 V |
| Maximum PV Array Power | 1200 W |
| Maximum Current | 50 A |
| Net Weight | 490 g |
| Connector | PV/Battery terminal block |
| Dimension (DxWxH mm) | 92.6 x 60.7 x 30.8 |
| Altitude | 0 ~ 3000 m |
| Humidity | 0-90 % RH (non-condensing) |
| Communication | |
| Display | Green LED indicating charging status |
| Protection Features | |
| IP Rating | IP 31 |
| Operating Conditions | |
| Operating Temperature | -20°C to 55°C |
| Storage Temperature Range | -40°C to 75°C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.