Voltronic PWM Solar Charge Controller
The Voltronic Power PWM Solar Charge Controller is designed to optimize the performance of your solar power system. With a maximum PV array open circuit voltage of 25 VDC and a power capacity of 120 W, this controller ensures efficient energy conversion and battery protection.
Technical Specifications
| Parameter | SCC-PWM-120W | SCC-PWM-240W | SCC-PWM-360W | SCC-PWM-600W | SCC-PWM-720W | SCC-PWM-1200W |
|---|---|---|---|---|---|---|
| Input | ||||||
| Maximum PV Array Open Circuit Voltage | 25 VDC | 50 VDC | 75 VDC | 75 VDC | 75 VDC | 75 VDC |
| Maximum PV Array Power | 120 W | 240 W | 360 W | 600 W | 720 W | 1200 W |
| Maximum Current | 10 A | 30 A | 30 A | 50 A | 30 A | 50 A |
| Output | ||||||
| Nominal Battery Voltage | 12 VDC | 24 VDC | 12 VDC | 12 VDC | 24 VDC | 24 VDC |
| Connected Battery Type | Sealed lead acid battery | |||||
| Maximum Charging Current | 10 A | 30 A | 50 A | 30 A | 50 A | |
| Ripple Voltage | < ± 1 V | |||||
| Charging Method | Two stages: bulk and floating 1 / floating 2 | Three stages: bulk, abs cv, floating | ||||
| Indicators | ||||||
| LED Display | Green LED indicating charging status | |||||
| Physical | ||||||
| Dimension, D X W X H (mm) | 92.6 x 60.7 x 30.8 | 107.6 x 75 x 30.8 | 131 x 85 x 40.5 | 107.6 x 75 x 30.8 | 131 x 85 x 40.5 | |
| Net Weight | 210 g | 340 g | 490 g | 340 g | 490 g | |
| Connector | PV/Battery terminal block | PV/Battery/Load terminal block | ||||
| IP Protection | IP 31 | |||||
| Operating Conditions | ||||||
| Operating Temperature | -20°C to 55°C | |||||
| Storage Temperature | -40°C to 75°C | |||||
| Altitude | 0 – 3000 m | |||||
Note: Specifications are based on the official Voltronic Power datasheet. Values may be subject to change; always verify against the latest manufacturer documentation.
Key Features
12VDC or 24VDC available
Multi-stage charging method
Lightweight design
Applications & Use Cases
Typical Applications
- Residential applications
- Commercial projects
- Industrial applications
- Backup power systems
Regional Installation Notes (United Arab Emirates)
Climate Suitability: Suitable for United Arab Emirates's hot climate with reliable performance at high temperatures.
- Ensure adequate ventilation
- Protection from direct sunlight
- Regular maintenance recommended
Frequently Asked Questions
What are the main performance specifications of the Voltronic Power PWM Solar Charge Controller?
The PWM Solar Charge Controller has a maximum PV array open circuit voltage of 25 VDC and a maximum PV array power of 120 W. It supports a maximum current of 10 A and is designed for a nominal battery voltage of 12 VDC.
Is the Voltronic Power PWM Solar Charge Controller compatible with all types of batteries?
This charge controller is specifically designed for sealed lead acid batteries. It may not be compatible with other battery types without additional configuration.
What are the physical specifications of the Voltronic Power PWM Solar Charge Controller?
The dimensions of the controller are 92.6 x 60.7 x 30.8 mm, and it weighs 210 g. It has an IP protection rating of IP 31, making it suitable for indoor use.
What are the installation requirements for the Voltronic Power PWM Solar Charge Controller?
The controller should be installed in a location with adequate ventilation and within the operating temperature range of -20°C to 55°C. Ensure that the PV and battery connections are secure and correct.
What warranty is offered with the Voltronic Power PWM Solar Charge Controller?
Voltronic Power typically offers a standard warranty for their products. Please check with your supplier or the product documentation for specific warranty terms.
What certifications does the Voltronic Power PWM Solar Charge Controller have?
The controller comes with standard certifications, ensuring compliance with industry standards for safety and performance.
What are the operating conditions for the Voltronic Power PWM Solar Charge Controller?
The controller operates effectively within a temperature range of -20°C to 55°C and can be stored in temperatures ranging from -40°C to 75°C.
What are the key features and benefits of the Voltronic Power PWM Solar Charge Controller?
Key features include a two-stage charging method (bulk and floating), a green LED display indicating charging status, and a ripple voltage of less than ± 1 V, ensuring efficient and reliable battery charging.